SLA6800M and SMA6800M Series
Inverter Power Modules (High Voltage 3-Phase Motor Drivers)
| Part Number | Rated Current (DC, TC=25°C) | Breakdown Voltage | RDS(on)(max)/
Vce(sat)(typ) | Main Switch | 3.3 V & 5 V Logic | UVLO | OCP | OCL | TD | TSD | FO | 3 Shunt | Boot Diode | STP | 7.5 V Reg | Heatsink Pad | # of Pins |
| SLA6805MP |
3.0 A |
600 V |
1.7 Ω |
IGBT, FRD |
x |
x |
x |
|
|
|
x |
|
|
|
|
x |
23 |
| SLA6845M |
3.0 A |
600 V |
1.7 Ω |
IGBT, FRD |
x |
x |
|
|
x |
|
x |
x |
|
|
x |
x |
24 |
| SMA6821MP |
2.0 A |
250 V |
1.8 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
|
x |
|
x |
|
24 |
| SMA6822MP |
1.5 A |
500 V |
4.0 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
|
x |
|
x |
|
24 |
| SMA6823MP |
2.5 A |
500 V |
2.4 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
|
x |
|
x |
|
24 |
| SLA6826M |
2.0 A |
250 V |
1.8 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
|
x |
|
x |
x |
24 |
| SLA6827M |
1.5 A |
500 V |
4.0 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
|
x |
|
x |
x |
24 |
| SLA6828M |
2.5 A |
500 V |
2.4 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
|
x |
|
x |
x |
24 |
| SMA6851M |
2.0 A |
250 V |
1.8 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
x |
x |
|
x |
|
24 |
| SMA6852M |
1.5 A |
500 V |
4.0 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
x |
x |
|
x |
|
24 |
| SMA6853M |
2.5 A |
500 V |
2.4 Ω |
MOSFET |
x |
x |
|
|
x |
|
x |
x |
x |
|
x |
|
24 |
| SMA6861M |
2.0 A |
250 V |
1.8 Ω |
MOSFET |
|
x |
x |
x |
|
x |
x |
|
x |
|
|
|
24 |
| SMA6862M |
1.5 A |
500 V |
4.0 Ω |
MOSFET |
|
x |
x |
x |
|
x |
x |
|
x |
|
|
|
24 |
| SMA6863M |
2.5 A |
500 V |
2.4 Ω |
MOSFET |
|
x |
x |
x |
|
x |
x |
|
x |
|
|
|
24 |
| SLA6866M |
2.0 A |
250 V |
1.8 Ω |
MOSFET |
|
x |
x |
x |
|
x |
x |
|
x |
|
|
x |
24 |
| SLA6867M |
1.5 A |
500 V |
4.0 Ω |
MOSFET |
|
x |
x |
x |
|
x |
x |
|
x |
|
|
x |
24 |
| SLA6868M |
2.5 A |
500 V |
2.4 Ω |
MOSFET |
|
x |
x |
x |
|
x |
x |
|
x |
|
|
x |
24 |
| 3.3 V, 5 V Logic: CMOS compatible input (3.3 to 5 V); UVLO: Undervoltage lock out; OCP: Overcurrent protection; OCL: Overcurrent limiting; TD: Thermal detection; TSD: Thermal Shutdown; FO: Fault output signal; 3 Shunt: Current detection with 3 shunt resistors; Heatsink Pad: Exposed thermal pad on device; Boot Diode: 3 bootstrap diodes (600 V/1 A each); STP: Protection against simultaneous high- and low-side turn-on; 7.5 V Reg: One pin for 7.5 V regulator output |
Features and Benefits
- Built-in necessary devices to configure the main circuit of inverter in a single package
- Built-in pre-driver IC
- MOSFET or IGBT power element
- Built in various functions and protections (options by part number)
- High-side gate driver using bootstrap circuit or floating power supply
- Built-in protection circuit for controlling power supply voltage drop
- Built-in overheat protection/detection circuit or overcurrent protection
- Built-in current limitting circuit
- Output of fault signal during operation of protection circuit
- 7.5 V regulator output pin
- CMOS compatible input (3.3 to 5 V)
- Available output current lineup:
- Small SIP
- Minimize the design space
- Easy to put heatsink
Applications
- Air conditioner fan
- Refrigerator compressor
- Dishwasher pump
Description
The SLA6800M and SMA6800M Series inverter power module (IPM) devices provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and commercial appliances. These ICs take 85 to 253 VAC input voltage, and 1.5 A to 3.0 A (continuous) output current. They can withstand voltages of up to 250-600 V (MOSFET breakdown voltage).
The SLA6800M and SMA6800M Series power packages includes an IC with all of the necessary power elements (six MOSFETs or IGBTs) and pre-driver ICs (two) needed to configure the main circuit of an inverter. This enables the main circuit of the inverter to be configured with fewer external components than traditional designs.
